Verlie Feeney
This large storage shed is built on a sturdy 2×6 floor frame with 4×4 pressure treated skids. This rectangular wood shed is easy to make and friendly with the budget.
Invest in high quality materials, such as cedar, pine or redwood, as the bench will be exposed to all kinds of weather.
Apply a few coats of paint over the components, to enhance their appearance and to protect them from bad weather. The first step of the project is to build the floor frame for the wood storage shed. Select the location for wood shed and remove the vegetation layer.
Next, lay the 4×4 skids under the floor frame and lock them together with rafter ties and 1 1/2″ structural screws. The skids will lift the floor frame from the ground to protect the components from moisture. Use pressure treated lumber for the floor skids, at least, as they will be exposed to moisture. Fit the 2×4 8 ft boards to the floor of the wood storage shed.
Align the edges flush and fit 1 1/4″ pieces between the boards to create even gaps. Drill pilot holes through the slats and insert 2 1/2″ screws to lock the boards to the floor frame.
The gaps between the boards will help with the drying out process, as the air flow will circulate from all directions. Drill pilot holes and insert 2 1/2″ screws to assemble the corner posts. Drill pilot holes and insert 3″ lag screws to lock them to the floor frame.
Notice the extra 2×6 supports attached to the middle of the floor shed, to the front and to the back.
Drill pilot holes and insert 3″ lag screws to secure them to the floor joists. Notice the T strong tie that joins the support beams to the middle of the vertical post.
Drill pilot holes and insert 1 5/8″ screws to secure the slats to the posts. Drill pilot holes and insert 1 5/8″ screws to lock the slats into place. Attach the 1×8 trims to the front and to the back of the wood storage shed roof.
Align the edges flush, drill pilot holes and insert 1 5/8″ screws, to lock them into place tightly.
Next, attach the metal roof sheets to the top of the firewood shed. Fill the gaps with wood putty and smooth the surface with 120-220 grit sandpaper.
Apply a few coats of paint or stain to protect the shed components from the elements and to enhance the look of the project. The lean to shape of the roof makes for a straight forward process and keeps the costs down. In addition, you can save space in your backyard by building the shed next to the property line.
If you have enjoyed the free project, I recommend you to share it with your friends, by using the social media widgets.
You can always save the plans as PDF or Print them using the floating widget on the left side of the screen (working only on PC or laptop).
