Jean Carroll
This easy wreath-making technique is unique and will stand out among the sea of flower wreaths. This technique immediately took off, and it gained so much popularity that we created several tutorials with only slight differences.
This Valentine’s Day pink and white mesh flower wreath will be a hit for three reasons.
This Valentine’s Day flower deco mesh wreath design comes together quickly, so it’s perfect to make multiples to fill up your inventory.
Follow along as I guide you step-by-step through the process of making this beautiful pink and white mesh flower wreath! Note: I use the wood burning tool to cut the poly burlap mesh and seal the edges so that it doesn’t fray.
Start by cutting (8) 11” strips of each of the poly burlap meshes with your wood-burning tool. Skip the outermost row of holes because we are making a slightly smaller design and don’t need zip ties there. Since the strips aren’t perfectly square, you’ll have a little extra on each side. Add this mesh petal to a zip tie on the outside ring of the UITC flower board. Remember to cut off your excess zip ties as you go through the process of making your magnolia door wreath. Add these petals to the zip ties on the middle row of the UITC board.
Add these petals to the zip ties in the innermost row of the UITC board. Note: You’ll notice that the center gets bulky as you finish adding in petals.
Grab the Dollar Tree circle disk, the glitter rope, and the hot glue gun.
Coil the glitter rope and use the hot glue gun to add it to the disk. Now take three metal u-pins and use wire cutters to shorten the ends if needed. Twist the pipe cleaners together on the back of the board to secure the disk in place.
Take a 3rd pipe cleaner and insert it into the two holes at the top of the board to create a hanger. Your pink and white mesh flower wreath is now complete and ready to adorn anyone’s door for Valentine’s Day. If you haven’t begun making Valentine’s Day inventory items yet, now’s the time to switch over and begin those projects. I love that you don’t need a lot of supplies or time to make this one, and you can still sell it in your shop for $75+. If you need any help with centerpiece-making, bow-making, wreath-making, or crafting in general, be sure to check out more of our tutorials on How to Make Wreaths. If you’re interested in more info on learning how to make wreaths or being in a community of like-minded crafters, check out our Creative Coaching Subscription Group.
Just pin this Valentine’s Day White and Pink Mesh flower wreath tutorial to save instructions for later! Yield: 1 wreath Materials 8 10" poly burlap deco mesh 11” strips of white
Hot glue gun Instructions Start by cutting (8) 11” strips of each of the poly burlap meshes with your wood burning tool. Note : Since the strips aren’t perfectly square, you’ll have a little extra on each side.
Add these petals to the zip ties on the middle row of the UITC board. Add these petals to the zip ties in the innermost row of the UITC board.
Note : I find it easier to add them to every other zip tie first and then fill in the gaps. Take the Dollar Tree circle disk, the glitter rope, and the hot glue gun.
Cut the glitter rope, leaving a little extra length (about 2 inches), and secure it with hot glue.
Add a dab of hot glue to the ends, then insert the first u-pin into the disk to hold the glitter rope in place.
Take a 3rd pipe cleaner and insert it into the two holes at the top of the board to create a hanger.
